가스 농축기,Nitrogen Gas Evaporator,MINI-100N
Block(custom Block제외) 하나가 포함된 상태의 공급가 입니다.
The nitrogen sample concentrator MINI-100N is mainly used for concentrating or
preparing sample in batch. Such as drug screening, hormone analysis, liquid phase and
mass spectrometry in the analysis of sample preparation. It works by blowing nitrogen in the surface of sample which is being heated to accelerate evaporating and separating the solvent in the
samples without oxygen. Instead of the rotary evaporation instrument, nitrogen sample concentrator can efficiently concentrate dozens of samples simultaneously.
Product features
u Synchronously working with heating by dry bath in the bottom and nitrogen blowing on
the surface accelerates liquid evaporation and sample concentration.
u The position of gas needle in air cavity can be adjusted to suit for different types of tubes.
u The height of the air chamber plate can be adjusted. The length of a standard gas needle is
150mm.
u Separately blow of 6 needles and flow regulating of each needle are available to avoid
gas waste.
uThe entire equipment can be put into ventilation cabinet when the concentration sample in
toxic solvents.
u Built in overheat protection, automatic fault detection and fault beep alarm devices.
u LED display immediate temperature and diminishing time. Operation is simple and convenient.
Technical parameters
Model |
MINI-100N |
Temp. range |
RT+5 ℃ ~ 100 ℃ |
Heating time |
≤ 12min (from 40℃ to 100℃) |
Temp. accuracy (40~100℃) |
±0.5 ℃ |
Temp. accuracy (100~150℃) |
±1 ℃ |
Temp. uniformity (100℃) |
±0.5 ℃ |
Temp. display accuracy |
0.1 ℃ |
Blocks quantity |
1 block |
Timing range |
1 ~ 999S or 1 min ~ 999min |
Nitrogen flow |
0 ~ 10 L/min |
Nitrogen pressure |
≤ 0.1 Mpa |
Power |
60 W |
Dimensions |
110 x 156 x 400 mm |
Blocks selection |
Refer to “Optional Accessories” |
Optional Accessory
Cat# |
Tube Quantity & Dia. Of hole |
MiniP-C |
6 x Ø15mm |
MiniP-D |
6 x Ø16mm |
MiniP-F |
Customized |
|